CO2 incubator INCOmed

As much function as necessary, as much individuality as possible! Put together your own customised INCOmed model.

Contact us for a price
In stock

CO2 incubator INCOmed

The INCOmed CO2 incubator is 100% AtmoSAFE

Cell cultures, tissue cultures and bacteria cultures, as well as micro-organisms, need protection in a controlled and physiologically ideal environment. Especially for in-vitro fertilization, the precision and reliability of the CO2 incubator are of crucial importance, as the slightest deviation in the CO2 atmosphere, temperature or humidity content during cultivation can already affect cell development. For this reason, Memmert has subjected its CO2 incubators INCOmed to a comprehensive evaluation process for their recognition as medical devices. The classification as class IIa medical device confirms that each Memmert CO2 incubator INCOmed complies with the essential safety requirements of the European Medical Devices Directive 93/42/EEC.

  • Temperature range up to +50 °C
  • 3 model sizes (108 l, 153 l and 246 l)
  • The standard INCOmed appliance can be expanded with 7 additional modules
  • State-of-the-art control technology based on the P performance class for all models
  • Humidity limit control integrated as standard for all models (humidity module with active humidity control system at extra charge)
  • For all models, the inner chamber, including all fittings and all sensors, can be sterilised at +160 °C in a 4 hour programme, using the standard STERICard
  • INC108med
  • INC153med
  • INC246med

Ventilation and Control

  • uniform atmosphere and temperature distribution owing to enclosed non-turbulent ventilation system in working chamber
  • adaptive, fuzzy-supported multifunctional digital microprocessor PID-controller
  • integral fault diagnostics for temperature, CO2 and humidity limit control
  • 2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the performance at the same temperature value
  • digital 7-day programme timer with real time clock, precise minute setting
  • digital display of all set parameters, such a temperature, weekdays, time, CO2, humidity and set-up values - language to be chosen via set-up
  • CO2-supply via sterile filter
  • digital electronic CO2-control with automatic zeroing (infrared measuring system) - adjustment range 0-10 % - resolution 0.1 %
  • intrinsic adjustment of altitude above sea level
  • CO2-supply interruption upon door opening
  • digital display of setpoit and actual values (LED) for temperature (resolution 0.1°C) and CO2 concentration (0.1 %)
  • calibration facility through controller for three freely selectable temperature values, 2-point-calibration for humidity: 20 and 90 %, 3-point calibration for CO2: 5 %, 7 %, 10 %
  • programme stored in case of power failure
  • chip-card (STERICard) for sterilisation of working chamber with fixed values (4 hours/160°C), without removal of sensors and mountings

Heating  Concept

  • large-area multi-function heating system on four sides with additional door and back heating to avoid condensation
  • incl. works calibration certificate for +37°C
  • integrated humidity limit control (88-97 % rh) with digital display of relative humidity - resolution of display 0.5 %, setting accuracy 1 %

Multiple Overtemperature Protection

  • with audible and visual alarm
  • overtemperature monitor TWW, protection class 3.1 or adjustable temperature limiter TWB, protection class 2, selectable on display
  • with audible and visual alarm in case of over-/under temperature or CO2, open door and empty gas cylinder
  • additionally integrated over- and undertemperature monitor "ASF", automatically following the setpoint value at a preset tolerance range, alarm in case of over- or undertemperature, heating is switched off in case of overtemperature
  • mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 10°C above nominal temperature

Textured Stainless Steel Casing

  • w x h x d: 710 x 778 x 550 mm
  • fully insulated stainless steel door with
    2-point locking (compression door lock), lockable
  • inner glass door with opening (8 mm Ø) to take gas sample
  • rear zinc-plated steel

Interior - Heating Concept

  • w x h x d: 560 x 480 x 400 mm, 108 l
  • easy-to-clean interior,made of stainless steel,reinforced by deep drawn ribbing, material 1.4301 (ASTM 304), hermetically welded
  • 2 perforated stainless steel shelves and 1 stainless steel water tray

Temperature Range

  • min. 8°C above ambient up to +50°C

Voltage / Power Rating

  • 230 V (+/- 10 %), 50/60 Hz / approx. 1.000 W

Packing Data

  • net weight approx. 70 kg
  • gross weight carton approx. 78 kg
  • dimensions approx.:
    carton w x h x d: 82 x 97 x 67 cm
  • the appliances must be transported upright

Customs Tariff Number

  • 8419 8998

Country of Origin

  • Federal Republic of Germany


  • DE 66812464
Type the characters you see in the picture above.